Jump to content

Make custom dimension that is based on the nether a surface world


ThanosGecko

Recommended Posts

You would need to override createChunkGenerator and return your own chunk generator that generates terrain in the way that you want.

It's not a simple process, but if you study how vanilla does it then you should get an idea of what to do.

I'm eager to learn and am prone to mistakes. Don't hesitate to tell me how I can improve.

Link to comment
Share on other sites

43 minutes ago, imacatlolol said:

You would need to override createChunkGenerator and return your own chunk generator that generates terrain in the way that you want.

It's not a simple process, but if you study how vanilla does it then you should get an idea of what to do.

I've already made my own chunk generator and all that, but the vanilla code is super confusing and like 90% of the variables are obfuscated even with updated mappings. Also it's a crap ton of math functions that I don't think I could realistically comprehend.

Link to comment
Share on other sites

16 minutes ago, ThanosGecko said:

I've already made my own chunk generator and all that, but the vanilla code is super confusing and like 90% of the variables are obfuscated even with updated mappings. Also it's a crap ton of math functions that I don't think I could realistically comprehend.

Well, here's a couple ideas to try:

  • To get rid of the roof bedrock you can override getBedrockRoofHeight to 0 in NetherGenSettings.
  • After that, try making your own CaveWorldCarver that works the same as NetherCaveWorldCarver, but with a higher maximum height so that it breaks through the top.

No idea if it'll work like you want, but it's worth trying. Experimentation is generally a good way to go.

I'm eager to learn and am prone to mistakes. Don't hesitate to tell me how I can improve.

Link to comment
Share on other sites

12 hours ago, imacatlolol said:

Well, here's a couple ideas to try:

  • To get rid of the roof bedrock you can override getBedrockRoofHeight to 0 in NetherGenSettings.
  • After that, try making your own CaveWorldCarver that works the same as NetherCaveWorldCarver, but with a higher maximum height so that it breaks through the top.

No idea if it'll work like you want, but it's worth trying. Experimentation is generally a good way to go.

I've already done the bedrock thing, that works fine. The CaveWorldCarver is a biome specific thing, and I know it's not the thing that controls if there's a roof or not as I replaced my biome with an OceanBiome and it still had a roof. I'm fairly sure it's in either the chunk generator or the noise chunk generator, but both have like 4 methods that are incomprehensible.

Link to comment
Share on other sites

It seems like it might be something in either this method:
 

public int func_222529_a(int p_222529_1_, int p_222529_2_, Heightmap.Type heightmapType) {
		int i = Math.floorDiv(p_222529_1_, this.horizontalNoiseGranularity);
		int j = Math.floorDiv(p_222529_2_, this.horizontalNoiseGranularity);
		int k = Math.floorMod(p_222529_1_, this.horizontalNoiseGranularity);
		int l = Math.floorMod(p_222529_2_, this.horizontalNoiseGranularity);
		double d0 = (double)k / (double)this.horizontalNoiseGranularity;
		double d1 = (double)l / (double)this.horizontalNoiseGranularity;
		double[][] adouble = new double[][]{this.func_222547_b(i, j), this.func_222547_b(i, j + 1), this.func_222547_b(i + 1, j), this.func_222547_b(i + 1, j + 1)};
		int i1 = this.getSeaLevel();

		for(int j1 = this.noiseSizeY - 1; j1 >= 0; --j1) {
			double d2 = adouble[0][j1];
			double d3 = adouble[1][j1];
			double d4 = adouble[2][j1];
			double d5 = adouble[3][j1];
			double d6 = adouble[0][j1 + 1];
			double d7 = adouble[1][j1 + 1];
			double d8 = adouble[2][j1 + 1];
			double d9 = adouble[3][j1 + 1];

			for(int k1 = this.verticalNoiseGranularity - 1; k1 >= 0; --k1) {
				double d10 = (double)k1 / (double)this.verticalNoiseGranularity;
				double d11 = MathHelper.lerp3(d10, d0, d1, d2, d6, d4, d8, d3, d7, d5, d9);
				int l1 = j1 * this.verticalNoiseGranularity + k1;
				if (d11 > 0.0D || l1 < i1) {
					BlockState blockstate;
					if (d11 > 0.0D) {
						blockstate = this.defaultBlock;
					} else {
						blockstate = this.defaultFluid;
					}

					if (heightmapType.getHeightLimitPredicate().test(blockstate)) {
						return l1 + 1;
					}
				}
			}
		}

		return 0;
	}

 

 

or this method:

 

public void generateSurface(IChunk chunkIn) {
		ChunkPos chunkpos = chunkIn.getPos();
		int i = chunkpos.x;
		int j = chunkpos.z;
		SharedSeedRandom sharedseedrandom = new SharedSeedRandom();
		sharedseedrandom.setBaseChunkSeed(i, j);
		ChunkPos chunkpos1 = chunkIn.getPos();
		int k = chunkpos1.getXStart();
		int l = chunkpos1.getZStart();
		double d0 = 0.0625D;
		Biome[] abiome = chunkIn.getBiomes();

		for(int i1 = 0; i1 < 16; ++i1) {
			for(int j1 = 0; j1 < 16; ++j1) {
				int k1 = k + i1;
				int l1 = l + j1;
				int i2 = chunkIn.getTopBlockY(Heightmap.Type.WORLD_SURFACE_WG, i1, j1) + 1;
				double d1 = this.surfaceDepthNoise.noiseAt((double)k1 * 0.0625D, (double)l1 * 0.0625D, 0.0625D, (double)i1 * 0.0625D);
				abiome[j1 * 16 + i1].buildSurface(sharedseedrandom, chunkIn, k1, l1, i2, d1, this.getSettings().getDefaultBlock(), this.getSettings().getDefaultFluid(), this.getSeaLevel(), this.world.getSeed());
			}
		}

		this.makeBedrock(chunkIn, sharedseedrandom);
	}

 

 

But I'm not sure what to change

Link to comment
Share on other sites

Alright I ended up commenting out random lines of code and one of them worked lmao. For anybody else that might need this in the future, I just commented out this line in the ChunkGenerator:

private double[] func_222572_j() {
		double[] adouble = new double[this.noiseSizeY()];

		for(int i = 0; i < this.noiseSizeY(); ++i) {
			adouble[i] = Math.cos((double)i * Math.PI * 6.0D / (double)this.noiseSizeY()) * 2.0D;
			double d0 = (double)i;
			if (i > this.noiseSizeY() / 2) {
				d0 = (double)(this.noiseSizeY() - 1 - i);
			}

			if (d0 < 4.0D) {
				d0 = 4.0D - d0;
				//adouble[i] -= d0 * d0 * d0 * 10.0D;
			}
		}

		return adouble;
	}

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.