Jump to content

Blocks and BlockItems


Recommended Posts

Just wondering, is there a less intensive way to generate BlockItems from Blocks than manually declaring the whole block list in item form?

 

In earlier versions you declared your Block, and when you registered it automatically created the associated ItemBlock. Now you have to declare all the Blocks and BlockItems separately, maintaining two lists of the same thing. It seems like the sort of thing that could be automated away with a convenience method.

Link to comment
Share on other sites

Personally I don't see what's so agonizing about writing an extra line of code per block

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Ah. I wouldn't claim it's agonising, but it becomes a bit tedious if you have quite a long list of blocks. And we programmers like to avoid code reuse wherever possible, don't we?

 

My first thought was a method like this:

	private static RegistryObject<Item> registerBlockItem(RegistryObject<Block> block, ItemGroup group)
	{
		return ITEMS.register(block.get().getRegistryName().getPath(), () -> new BlockItem(block.get(), new Item.Properties().group(group)));
	}

but of course it failed because the RegistryObject's value doesn't exist at that point.

Link to comment
Share on other sites

If you declare your blocks in a DefferedRegister than you can do something like this:

Quote

 


public class ModBlocks {
    public static final DeferredRegister<Block> BLOCKS = new DeferredRegister<>(ForgeRegistries.BLOCKS, Main.MODID);
	
    (...)
    public static final RegistryObject<Block> EXAMPLE_BLOCK = BLOCKS.register("example_block", () -> new Block(<properties, etc>));
    (...)
}

 

 

Quote

    @SubscribeEvent
    public static void onItemsRegistry(final RegistryEvent.Register<Item> itemRegistryEvent) {
        final IForgeRegistry<Item> registry = itemRegistryEvent.getRegistry();

        ModBlocks.BLOCKS.getEntries().stream()
                .map(RegistryObject::get)
                .forEach(block -> {
                    final Item.Properties properties = new Item.Properties().group(ModItemGroups.MOD_ITEM_GROUP);
                    final BlockItem blockItem;
                    blockItem = new BlockItem(block, properties);
                    blockItem.setRegistryName(Objects.requireNonNull(block.getRegistryName()));
                    registry.register(blockItem);
                });
    }

 

 

procedure WakeMeUp(Integer plusTime);
var
  I: Integer;
begin
  for I := 0 to plusTime do begin
    println('One more minute!');
    Sleep(1000);
  end;
  println('Okay, nothing to worry, I''m alive!');
  println('So... somebody can give me a coffee?');
  println('I know it''s Pascal, and not Java, but I love it :D.');
end;
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.