Jump to content
Please read the rules and FAQ before starting a new topic
Currently supported: All versions

LAN Forge server stops upon startup when mods are added

oscrsvn

By oscrsvn
in Support & Bug Reports

 Share

Recommended Posts

oscrsvn Tree Puncher

oscrsvn

Posted
Posted

Firstly I'd like to state that I'm new to modding servers.  

 

I have created a LAN server that I intend to use Hamachi to allow a friend to connect to so we can play coop.  I'm using the latest forge version as well as the latest version of Xaero's Minimap (https://www.minecraftforum.net/forums/mapping-and-modding-java-edition/minecraft-mods/2379024-xaeros-minimap-forge-1-14-2-1-13-2-1-12-2-1-12-1).  I've combed that post and don't see anything related to required files for installation other than the mod itself.  I've properly set up the forge server by first opening the minecraftserver.jar, agreeing to the EULA and then opening the forge.jar.  In this step, the server runs.  

 

Now, from my understanding the only thing I would have to do is copy the mod.jar to the mods folder located in my server folder.  When I do this and start the server, it boots for about a half of a second and then closes. 

 

Below is a pastebin of the log taken from the server folder after the crash.

https://pastebin.com/hWTsHZAp

 

Any help would be appreciated.

Link to comment
Share on other sites
oscrsvn Tree Puncher

oscrsvn

Posted
  • Author
Posted

Ok, so I've downloaded a similar mod, and it turns out my deduction was correct.  It seems to be that mod not working.  If anyone has any ideas as to why, feel free, but I do not expect anything as this doesn't seem to be a forge related issue.

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

You have at least one client-only mod that you tried to install on the server, unfortunately this mod was not developed in a way that would guard against this so it tries to barrel on and crashes.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
oscrsvn Tree Puncher

oscrsvn

Posted
  • Author
Posted
On 6/22/2019 at 3:06 AM, DaemonUmbra said:

You have at least one client-only mod that you tried to install on the server, unfortunately this mod was not developed in a way that would guard against this so it tries to barrel on and crashes.

I ended up figuring this out.  Thank you for the reply though.  Only needed to be installed client-side, I felt like such an idiot lol.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept