Jump to content

Build failed when running "gradlew setupDecompWorkspace"


Golden_Crafter

Recommended Posts

I'm a veteran mod developer and I can't run the command "gradlew setupDecompWorkspace" and get a "BUILD SUCCESSFUL." I'm doing Minecraft 1.12.2 and I edited gradle.properties to have "org.gradle.jvmargs=-Xmx1G" and it's still failing build.

In the beginning, there was air. Then came dirt. Then came stone. Then came Creepers and whatnot. Then came Minecraft 1.12.2. Then came Mod development. Then came fun mods. The Ciiiiiiircle of modding!

Link to comment
Share on other sites

49 minutes ago, Golden_Crafter said:

I edited gradle.properties to have "org.gradle.jvmargs=-Xmx1G" and it's still failing build.

Why did you edit this value?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

9 minutes ago, DaemonUmbra said:

Why did you edit this value?

Because someone on YouTube and in the docs, it said if I encountered the error, I should edit the value.

In the beginning, there was air. Then came dirt. Then came stone. Then came Creepers and whatnot. Then came Minecraft 1.12.2. Then came Mod development. Then came fun mods. The Ciiiiiiircle of modding!

Link to comment
Share on other sites

https://en.wikipedia.org/wiki/Cargo_cult_programming

Put it back to 3G and show your error.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

The error is in the image below, how to fix?

error.PNG

Edited by Golden_Crafter

In the beginning, there was air. Then came dirt. Then came stone. Then came Creepers and whatnot. Then came Minecraft 1.12.2. Then came Mod development. Then came fun mods. The Ciiiiiiircle of modding!

Link to comment
Share on other sites

You are running a 32-Bit JDK, you should be using a 64-Bit JDK.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

1 hour ago, DaemonUmbra said:

You are running a 32-Bit JDK, you should be using a 64-Bit JDK.

Okay, I'll try that. Thanks!

In the beginning, there was air. Then came dirt. Then came stone. Then came Creepers and whatnot. Then came Minecraft 1.12.2. Then came Mod development. Then came fun mods. The Ciiiiiiircle of modding!

Link to comment
Share on other sites

Each task has criteria for skipping, usually it will skip tasks that have already been done and had their output cached, so you're not downloading the game assets or running the same decomp process every time when nothing has changed

  • Thanks 1

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

The

:recompileMC FAILED

is driving me crazy. Here's the error. I have the 64 bit JDK installed

error.PNG

Edited by Golden_Crafter

In the beginning, there was air. Then came dirt. Then came stone. Then came Creepers and whatnot. Then came Minecraft 1.12.2. Then came Mod development. Then came fun mods. The Ciiiiiiircle of modding!

Link to comment
Share on other sites

What's in that folder?

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.