Jump to content
Search the Forums BEFORE making a new post.
Currently supported: All versions

1.13.2 - No Console Output?

IceMetalPunk

By IceMetalPunk
in Modder Support

 Share

Recommended Posts

IceMetalPunk Diamond Finder

IceMetalPunk

Posted
Posted

I just set up Forge for 1.13.2, and in an effort to ensure I set everything up correctly (since it's a bit different than older versions of Forge), I just ran the example mod under the Client configuration. It runs just fine... but I'm not seeing any of the example output. (I removed debug-level logging from the Java arguments, but as you can see, info-level logging shows up fine, just not the logs from the mod itself). I've attached the entire console logs from starting it, then quitting from the main menu without doing anything. In the main example mod code, there are logs like "HELLO FROM PREINIT" and such, but those didn't show up anywhere in the console.

Is there an extra step that I need to do besides importing the Gradle project and running the "eclipse" task? (The fact that the project shows in my Package Explorer just fine and also runs just fine would suggest I set it up mostly correctly... I just don't know why I'm not getting any of the mod output.)

forge_1.13_test.log

Whatever Minecraft needs, it is most likely not yet another tool tier.

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

have you tried the latest MDK?

Be warned, there are build.gradle changes

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
DaemonUmbra Reality Controller

DaemonUmbra

Posted
Posted

1.13.2 is still very much in development and a build is created for each commit on the github so there will be many many versions.

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/: 100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites
IceMetalPunk Diamond Finder

IceMetalPunk

Posted
  • Author
Posted (edited)

Hm... the latest version won't build at all. I've gotten everything setup for Eclipse, and the project imported into Eclipse, but there are no configurations. When I try to run the Gradle "build" task, it fails, because it's looking in my JRE folder instead of my JDK folder. My JAVA_HOME environment variables are set to point to the JDK directory... is there somewhere else I need to change a path definition?

Edited by IceMetalPunk

Whatever Minecraft needs, it is most likely not yet another tool tier.

Link to comment
Share on other sites
drcrazy Tree Puncher

drcrazy

Posted
Posted
On 2/23/2019 at 3:02 AM, IceMetalPunk said:

Hm... the latest version won't build at all. I've gotten everything setup for Eclipse, and the project imported into Eclipse, but there are no configurations. When I try to run the Gradle "build" task, it fails, because it's looking in my JRE folder instead of my JDK folder. My JAVA_HOME environment variables are set to point to the JDK directory... is there somewhere else I need to change a path definition?

You can change it via gradle.properties in project root. Just put 

org.gradle.java.home=<path>

into it

Link to comment
Share on other sites
IceMetalPunk Diamond Finder

IceMetalPunk

Posted
  • Author
Posted
37 minutes ago, drcrazy said:

You can change it via gradle.properties in project root. Just put 


org.gradle.java.home=<path>

into it

That worked, thanks! And now I'm going to have to ask what is likely a very stupid question... Until now, whenever I've worked with Forge (including the previous build for 1.13 from like a week or two ago), the Gradle build process has set up run configurations automatically. So I never really paid attention to the settings for the Client and Server run configs. This build didn't seem to do that; is there a quick rundown of what the various options need to be for each configuration? (That is, that main class for each, any required arguments, and any required environment variable setup.) I'm fine with the coding, but when it comes to IDE settings, I tend to feel a bit like a 5-year-old sometimes -_- But of course I can't test if I can't run, so... yeah.

Whatever Minecraft needs, it is most likely not yet another tool tier.

Link to comment
Share on other sites
IceMetalPunk Diamond Finder

IceMetalPunk

Posted
  • Author
Posted
13 hours ago, drcrazy said:

As for eclipse  - there is issue currently with eclipse not able to launch your mod using launch configuration. Use gradlew runClient instead.  In 1.12 eclipse is fine to both build and run. Hope same will be for 1.13.2

That's unfortunate... as far as I can tell, Eclipse doesn't have a terminal, and trying to look through output in PowerShell is... ugh. Well, I'll try and sort through it all and see if the problem is solved in the latest (ish) revision. Thanks to both of you!

Whatever Minecraft needs, it is most likely not yet another tool tier.

Link to comment
Share on other sites
drcrazy Tree Puncher

drcrazy

Posted
Posted

On a bright side there is an update about eclipse. You need to edit launch and remove excessive mod mentions. It is mentioned in this commit: 

Build: 1.13.2-25.0.57 - Tue Feb 26 02:11:50 GMT 2019
	john816_:
		Update MDK Readme to describe new FG3 procedures. (#5553)
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

Announcements



  • Recently Browsing

    • No registered users viewing this page.

  • Posts

    • chxr
      How can i baked a custom models? Are there any tutorials?

      By chxr · Posted

      Here is a tutorial from this same forum that I tried and kinda made work. Take into account that you will have to manage the offset (like rotation, and the offset relative to things like the main hand, offhand etc) by yourself and that can get very troublesome at times.  
    • DroidCrafter23
      How do I make a drink item?

      By DroidCrafter23 · Posted

      I have done this now but have got the error:   'food(net.minecraft.world.food.FoodProperties)' in 'net.minecraft.world.item.Item.Properties' cannot be applied to                '(net.minecraftforge.registries.RegistryObject<net.minecraft.world.item.Item>)' public static final RegistryObject<Item> LEMON_JUICE = ITEMS.register( "lemon_juice", () -> new Item( new HoneyBottleItem.Properties().stacksTo(1).food( (new FoodProperties.Builder()) .nutrition(3) .saturationMod(0.25F) .effect(() -> new MobEffectInstance(MobEffects.DAMAGE_RESISTANCE, 1500), 0.01f ) .build() ) )); The code above is from the ModFoods class, the one below from the ModItems class. public static final RegistryObject<Item> LEMON_JUICE = ITEMS.register("lemon_juice", () -> new Item(new Item.Properties().food(ModFoods.LEMON_JUICE)));   I shall keep going between them to try and figure out the cause. I am sorry if this is too much for you to help with, though I thank you greatly for your patience and all the effort you have put in to help me.
    • DroidCrafter23
      How do I make a drink item?

      By DroidCrafter23 · Posted

      I have been following these exact tutorials for quite a while, I must agree that they are amazing and easy to follow. I have registered the item in the ModFoods class, I tried to do it in ModItems (Where all the items should be registered) but got errors, I think I may need to revert this and figure it out from there. Once again, thank you for your help! 👍 Just looking back, I have noticed in your code you added ITEMS.register, which I am guessing means that they are being registered in ModFoods, I shall go through the process of trial and error to figure this out.
    • Orladodgreat
      𓅓+2349027025197𓅓 I WANT TO JOIN SECRET SOCIETY FOR MONEY RITUAL {¶}

      By Orladodgreat · Posted

      ♈+2349027025197ஜ Are you a pastor, business man or woman, politician, civil engineer, civil servant, security officer, entrepreneur, Job seeker, poor or rich Seeking how to join a brotherhood for protection and wealth here’s is your opportunity, but you should know there’s no ritual without repercussions but with the right guidance and support from this great temple your destiny is certain to be changed for the better and equally protected depending if you’re destined for greatness Call now for enquiry +2349027025197☎+2349027025197₩™ I want to join ILLUMINATI occult without human sacrificeGREATORLDRADO BROTHERHOOD OCCULT , Is The Club of the Riches and Famous; is the world oldest and largest fraternity made up of 3 Millions Members. We are one Family under one father who is the Supreme Being. In Greatorldrado BROTHERHOOD we believe that we were born in paradise and no member should struggle in this world. Hence all our new members are given Money Rewards once they join in order to upgrade their lifestyle.; interested viewers should contact us; on. +2349027025197 ۝ஐℰ+2349027025197 ₩Greatorldrado BROTHERHOOD OCCULT IS A SACRED FRATERNITY WITH A GRAND LODGE TEMPLE SITUATED IN G.R.A PHASE 1 PORT HARCOURT NIGERIA, OUR NUMBER ONE OBLIGATION IS TO MAKE EVERY INITIATE MEMBER HERE RICH AND FAMOUS IN OTHER RISE THE POWERS OF GUARDIANS OF AGE+. +2349027025197   SEARCHING ON HOW TO JOIN THE Greatorldrado BROTHERHOOD MONEY RITUAL OCCULT IS NOT THE PROBLEM BUT MAKE SURE YOU'VE THOUGHT ABOUT IT VERY WELL BEFORE REACHING US HERE BECAUSE NOT EVERYONE HAS THE HEART TO DO WHAT IT TAKES TO BECOME ONE OF US HERE, BUT IF YOU THINK YOU'RE SERIOUS MINDED AND READY TO RUN THE SPIRITUAL RACE OF LIFE IN OTHER TO ACQUIRE ALL YOU NEED HERE ON EARTH CONTACT SPIRITUAL GRANDMASTER NOW FOR INQUIRY +2349027025197   +2349027025197 Are you a pastor, business man or woman, politician, civil engineer, civil servant, security officer, entrepreneur, Job seeker, poor or rich Seeking how to join
    • KeBaB95
      Mod Pack hooror

      By KeBaB95 · Posted

      hi bitch

  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept