Jump to content

Forge 1.11.2 server mods doesnt work


amalekita

Recommended Posts

9 minutes ago, DaemonUmbra said:

Are you still clicking on the jars or do you have a command line window open, because at this point if you were running them like we asked, you would be able to see the server vomitting out an error into the command line.

I try to do it via comand line in my case the comand line is cd E:\forge-1.11.2-13.20.0.2257-universal.jar  but it says error. Im new to this is the comand wrong an where is it wrong

Desktop Screenshot 2018.06.02 - 19.32.53.44.png

Edited by amalekita
thats the comand i made
Link to comment
Share on other sites

cd

Change directory (Note in CMD you do NOT use this command to change drives)

Example:

cd "C:\Forge Server\"

(Note the quotes that MUST be used if the path has spaces)

 

 To change drives you just type the drive letter followed by a colon

Example:

E:

 

To run a jar file, invoke the "java" command with the "-jar" switch followed by the file name including the ".jar" file extension

Example:

java -jar forge.jar

(Note that this command will only work if the jar file is in the currently selected directory)

 

The usual command to run a Forge server is:

java -jar <forge jar name> -Xmx 3G -Xms3G

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

4 minutes ago, diesieben07 said:

Since your folder is on a drive other than C you have type E: and press enter on the command line before performing step 3 of my instructions.

Also, you did not follow my instructions. You must follow them exactly. Do not skip steps and do not ignore things.

No i have the entire drive for the server. But ok i will put it in an folder when you want.

Link to comment
Share on other sites

cd  is to move into folders, not to open files.

What you want is to


switch drives

E:

move to the folder

cd E:\server\

and then run java

java -jar forge-1.11.2-13.20.0.2257-universal.jar -Xmx3G -Xms3G

 

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

35 minutes ago, diesieben07 said:

Great, now you added a picture from when you are running the minecraft_server jar. Which we already told you will launch a vanilla server. Why do you keep doing it?

 

6 minutes ago, amalekita said:

Oh my gosh i just notices so sry for beeing stupid. ok i tried to make the jar comand to start the server and it said it couldnt acces the jarfile but the forge jar name i replaced it with forge-1.11.2-13.20.0.2257-universal.jar


java -jar <forge jar name> -Xmx 3G -Xms3G

 

Desktop Screenshot 2018.06.02 - 19.48.00.45.png

 

Link to comment
Share on other sites

Please read my last reply, those are literally the commands you need for your specific case.

Edited by DaemonUmbra

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

First why did you add question marks to the end

Second, please run it again question marks and scroll down so we can see the actual error

 

Fairly certain I know what it is, but I still want to be safe.

Edited by DaemonUmbra

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

1 minute ago, DaemonUmbra said:

First why did you add question marks to the end

Second, please run it again but scroll down so we can see the actual error

See the picture again. And i made the question mark because i asked what can we do with that information now.

Link to comment
Share on other sites

You need to use Java 8, you likely have 10 installed, if you can live without the most recent version of Java uninstall all versions other than 8, if not you will need to go into program files, find the java.exe of Java 8, and replace "java" in my previous instructions with the full path to it (including the name of the file itself this time)

This is my Forum Signature, I am currently attempting to transform it into a small guide for fixing easier issues using spoiler blocks to keep things tidy.

 

As the most common issue I feel I should put this outside the main bulk:

The only official source for Forge is https://files.minecraftforge.net, and the only site I trust for getting mods is CurseForge.

If you use any site other than these, please take a look at the StopModReposts project and install their browser extension, I would also advise running a virus scan.

 

For players asking for assistance with Forge please expand the spoiler below and read the appropriate section(s) in its/their entirety.

Spoiler

Logs (Most issues require logs to diagnose):

Spoiler

Please post logs using one of the following sites (Thank you Lumber Wizard for the list):

https://gist.github.com/100MB Requires member (Free)

https://pastebin.com/: 512KB as guest, 10MB as Pro ($$$)

https://hastebin.com/: 400KB

Do NOT use sites like Mediafire, Dropbox, OneDrive, Google Drive, or a site that has a countdown before offering downloads.

 

What to provide:

...for Crashes and Runtime issues:

Minecraft 1.14.4 and newer:

Post debug.log

Older versions:

Please update...

 

...for Installer Issues:

Post your installer log, found in the same place you ran the installer

This log will be called either installer.log or named the same as the installer but with .log on the end

Note for Windows users:

Windows hides file extensions by default so the installer may appear without the .jar extension then when the .log is added the log will appear with the .jar extension

 

Where to get it:

Mojang Launcher: When using the Mojang launcher debug.log is found in .minecraft\logs.

 

Curse/Overwolf: If you are using the Curse Launcher, their configurations break Forge's log settings, fortunately there is an easier workaround than I originally thought, this works even with Curse's installation of the Minecraft launcher as long as it is not launched THROUGH Twitch:

Spoiler
  1. Make sure you have the correct version of Forge installed (some packs are heavily dependent on one specific build of Forge)
  2. Make a launcher profile targeting this version of Forge.
  3. Set the launcher profile's GameDir property to the pack's instance folder (not the instances folder, the folder that has the pack's name on it).
  4. Now launch the pack through that profile and follow the "Mojang Launcher" instructions above.

Video:

Spoiler

 

 

 

or alternately, 

 

Fallback ("No logs are generated"):

If you don't see logs generated in the usual place, provide the launcher_log.txt from .minecraft

 

Server Not Starting:

Spoiler

If your server does not start or a command window appears and immediately goes away, run the jar manually and provide the output.

 

Reporting Illegal/Inappropriate Adfocus Ads:

Spoiler

Get a screenshot of the URL bar or copy/paste the whole URL into a thread on the General Discussion board with a description of the Ad.

Lex will need the Ad ID contained in that URL to report it to Adfocus' support team.

 

Posting your mod as a GitHub Repo:

Spoiler

When you have an issue with your mod the most helpful thing you can do when asking for help is to provide your code to those helping you. The most convenient way to do this is via GitHub or another source control hub.

When setting up a GitHub Repo it might seem easy to just upload everything, however this method has the potential for mistakes that could lead to trouble later on, it is recommended to use a Git client or to get comfortable with the Git command line. The following instructions will use the Git Command Line and as such they assume you already have it installed and that you have created a repository.

 

  1. Open a command prompt (CMD, Powershell, Terminal, etc).
  2. Navigate to the folder you extracted Forge’s MDK to (the one that had all the licenses in).
  3. Run the following commands:
    1. git init
    2. git remote add origin [Your Repository's URL]
      • In the case of GitHub it should look like: https://GitHub.com/[Your Username]/[Repo Name].git
    3. git fetch
    4. git checkout --track origin/master
    5. git stage *
    6. git commit -m "[Your commit message]"
    7. git push
  4. Navigate to GitHub and you should now see most of the files.
    • note that it is intentional that some are not synced with GitHub and this is done with the (hidden) .gitignore file that Forge’s MDK has provided (hence the strictness on which folder git init is run from)
  5. Now you can share your GitHub link with those who you are asking for help.

[Workaround line, please ignore]

 

Link to comment
Share on other sites

2 minutes ago, DaemonUmbra said:

You need to use Java 8, you likely have 10 installed, if you can live without the most recent version of Java uninstall all versions other than 8, if not you will need to go into program files, find the java.exe of Java 8, and replace "java" in my previous instructions with the full path to it (including the name of the file itself this time)

Ok thanks i will try it. ?

 

Link to comment
Share on other sites

10 minutes ago, DaemonUmbra said:

You need to use Java 8, you likely have 10 installed, if you can live without the most recent version of Java uninstall all versions other than 8, if not you will need to go into program files, find the java.exe of Java 8, and replace "java" in my previous instructions with the full path to it (including the name of the file itself this time)

it works the forge jar works but it only has 3g of ram can i make it into 8 if i just make the comand xmx8g then xmx3g

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • it crashed again     What the console says : [00:02:03] [Server thread/INFO] [Easy NPC/]: [EntityManager] Server started! [00:02:03] [Server thread/INFO] [co.gi.al.ic.IceAndFire/]: {iceandfire:fire_dragon_roost=true, iceandfire:fire_lily=true, iceandfire:spawn_dragon_skeleton_fire=true, iceandfire:lightning_dragon_roost=true, iceandfire:spawn_dragon_skeleton_lightning=true, iceandfire:ice_dragon_roost=true, iceandfire:ice_dragon_cave=true, iceandfire:lightning_dragon_cave=true, iceandfire:cyclops_cave=true, iceandfire:spawn_wandering_cyclops=true, iceandfire:spawn_sea_serpent=true, iceandfire:frost_lily=true, iceandfire:hydra_cave=true, iceandfire:lightning_lily=true, iceandfireixie_village=true, iceandfire:myrmex_hive_jungle=true, iceandfire:myrmex_hive_desert=true, iceandfire:silver_ore=true, iceandfire:siren_island=true, iceandfire:spawn_dragon_skeleton_ice=true, iceandfire:spawn_stymphalian_bird=true, iceandfire:fire_dragon_cave=true, iceandfire:sapphire_ore=true, iceandfire:spawn_hippocampus=true, iceandfire:spawn_death_worm=true} [00:02:03] [Server thread/INFO] [co.gi.al.ic.IceAndFire/]: {TROLL_S=true, HIPPOGRYPH=true, AMPHITHERE=true, COCKATRICE=true, TROLL_M=true, DREAD_LICH=true, TROLL_F=true} [00:02:03] [Server thread/INFO] [ne.be.lo.WeaponRegistry/]: Encoded Weapon Attribute registry size (with package overhead): 41976 bytes (in 5 string chunks with the size of 10000) [00:02:03] [Server thread/INFO] [patchouli/]: Sending reload packet to clients [00:02:03] [Server thread/WARN] [voicechat/]: [voicechat] Running in offline mode - Voice chat encryption is not secure! [00:02:03] [VoiceChatServerThread/INFO] [voicechat/]: [voicechat] Using server-ip as bind address: 0.0.0.0 [00:02:03] [Server thread/WARN] [ModernFix/]: Dedicated server took 22.521 seconds to load [00:02:03] [VoiceChatServerThread/INFO] [voicechat/]: [voicechat] Voice chat server started at 0.0.0.0:25565 [00:02:03] [Server thread/WARN] [minecraft/SynchedEntityData]: defineId called for: class net.minecraft.world.entity.player.Player from class tschipp.carryon.common.carry.CarryOnDataManager [00:02:03] [Server thread/INFO] [ne.mi.co.AdvancementLoadFix/]: Using new advancement loading for net.minecraft.server.PlayerAdvancements@2941ffd5 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 0 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 1 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 2 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 3 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 4 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 5 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 6 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 7 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 8 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 9 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 10 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 11 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 12 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 13 [00:02:10] [Netty Epoll Server IO #2/INFO] [Calio/]: Received acknowledgment for login packet with id 14 [00:02:19] [Server thread/INFO] [ne.mi.co.AdvancementLoadFix/]: Using new advancement loading for net.minecraft.server.PlayerAdvancements@ebc7ef2 [00:02:19] [Server thread/INFO] [minecraft/PlayerList]: ZacAdos[/90.2.17.162:49242] logged in with entity id 1062 at (-1848.6727005281205, 221.0, -3054.2468255848935) [00:02:19] [Server thread/ERROR] [ModernFix/]: Skipping entity ID sync for com.talhanation.smallships.world.entity.ship.Ship: java.lang.NoClassDefFoundError: net/minecraft/client/CameraType [00:02:19] [Server thread/INFO] [minecraft/MinecraftServer]: - Gloop - ZacAdos joined the game [00:02:19] [Server thread/INFO] [xa.pa.OpenPartiesAndClaims/]: Updating all forceload tickets for cc56befd-d376-3526-a760-340713c478bd [00:02:19] [Server thread/INFO] [se.mi.te.da.DataManager/]: Sending data to client: ZacAdos [00:02:19] [Server thread/INFO] [voicechat/]: [voicechat] Received secret request of - Gloop - ZacAdos (17) [00:02:19] [Server thread/INFO] [voicechat/]: [voicechat] Sent secret to - Gloop - ZacAdos [00:02:21] [VoiceChatPacketProcessingThread/INFO] [voicechat/]: [voicechat] Successfully authenticated player cc56befd-d376-3526-a760-340713c478bd [00:02:22] [VoiceChatPacketProcessingThread/INFO] [voicechat/]: [voicechat] Successfully validated connection of player cc56befd-d376-3526-a760-340713c478bd [00:02:22] [VoiceChatPacketProcessingThread/INFO] [voicechat/]: [voicechat] Player - Gloop - ZacAdos (cc56befd-d376-3526-a760-340713c478bd) successfully connected to voice chat stop [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Stopping the server [00:02:34] [Server thread/INFO] [mo.pl.ar.ArmourersWorkshop/]: stop local service [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Stopping server [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Saving players [00:02:34] [Server thread/INFO] [minecraft/ServerGamePacketListenerImpl]: ZacAdos lost connection: Server closed [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: - Gloop - ZacAdos left the game [00:02:34] [Server thread/INFO] [xa.pa.OpenPartiesAndClaims/]: Updating all forceload tickets for cc56befd-d376-3526-a760-340713c478bd [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Saving worlds [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Saving chunks for level 'ServerLevel[world]'/minecraft:overworld [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Saving chunks for level 'ServerLevel[world]'/minecraft:the_end [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: Saving chunks for level 'ServerLevel[world]'/minecraft:the_nether [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: ThreadedAnvilChunkStorage (world): All chunks are saved [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: ThreadedAnvilChunkStorage (DIM1): All chunks are saved [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: ThreadedAnvilChunkStorage (DIM-1): All chunks are saved [00:02:34] [Server thread/INFO] [minecraft/MinecraftServer]: ThreadedAnvilChunkStorage: All dimensions are saved [00:02:34] [Server thread/INFO] [xa.pa.OpenPartiesAndClaims/]: Stopping IO worker... [00:02:34] [Server thread/INFO] [xa.pa.OpenPartiesAndClaims/]: Stopped IO worker! [00:02:34] [Server thread/INFO] [Calio/]: Removing Dynamic Registries for: net.minecraft.server.dedicated.DedicatedServer@7dc879e1 [MineStrator Daemon]: Checking server disk space usage, this could take a few seconds... [MineStrator Daemon]: Updating process configuration files... [MineStrator Daemon]: Ensuring file permissions are set correctly, this could take a few seconds... [MineStrator Daemon]: Pulling Docker container image, this could take a few minutes to complete... [MineStrator Daemon]: Finished pulling Docker container image container@pterodactyl~ java -version openjdk version "17.0.10" 2024-01-16 OpenJDK Runtime Environment Temurin-17.0.10+7 (build 17.0.10+7) OpenJDK 64-Bit Server VM Temurin-17.0.10+7 (build 17.0.10+7, mixed mode, sharing) container@pterodactyl~ java -Xms128M -Xmx6302M -Dterminal.jline=false -Dterminal.ansi=true -Djline.terminal=jline.UnsupportedTerminal -p libraries/cpw/mods/bootstraplauncher/1.1.2/bootstraplauncher-1.1.2.jar:libraries/cpw/mods/securejarhandler/2.1.4/securejarhandler-2.1.4.jar:libraries/org/ow2/asm/asm-commons/9.5/asm-commons-9.5.jar:libraries/org/ow2/asm/asm-util/9.5/asm-util-9.5.jar:libraries/org/ow2/asm/asm-analysis/9.5/asm-analysis-9.5.jar:libraries/org/ow2/asm/asm-tree/9.5/asm-tree-9.5.jar:libraries/org/ow2/asm/asm/9.5/asm-9.5.jar:libraries/net/minecraftforge/JarJarFileSystems/0.3.16/JarJarFileSystems-0.3.16.jar --add-modules ALL-MODULE-PATH --add-opens java.base/java.util.jar=cpw.mods.securejarhandler --add-opens java.base/java.lang.invoke=cpw.mods.securejarhandler --add-exports java.base/sun.security.util=cpw.mods.securejarhandler --add-exports jdk.naming.dns/com.sun.jndi.dns=java.naming -Djava.net.preferIPv6Addresses=system -DignoreList=bootstraplauncher-1.1.2.jar,securejarhandler-2.1.4.jar,asm-commons-9.5.jar,asm-util-9.5.jar,asm-analysis-9.5.jar,asm-tree-9.5.jar,asm-9.5.jar,JarJarFileSystems-0.3.16.jar -DlibraryDirectory=libraries -DlegacyClassPath=libraries/cpw/mods/securejarhandler/2.1.4/securejarhandler-2.1.4.jar:libraries/org/ow2/asm/asm/9.5/asm-9.5.jar:libraries/org/ow2/asm/asm-commons/9.5/asm-commons-9.5.jar:libraries/org/ow2/asm/asm-tree/9.5/asm-tree-9.5.jar:libraries/org/ow2/asm/asm-util/9.5/asm-util-9.5.jar:libraries/org/ow2/asm/asm-analysis/9.5/asm-analysis-9.5.jar:libraries/net/minecraftforge/accesstransformers/8.0.4/accesstransformers-8.0.4.jar:libraries/org/antlr/antlr4-runtime/4.9.1/antlr4-runtime-4.9.1.jar:libraries/net/minecraftforge/eventbus/6.0.3/eventbus-6.0.3.jar:libraries/net/minecraftforge/forgespi/6.0.0/forgespi-6.0.0.jar:libraries/net/minecraftforge/coremods/5.0.1/coremods-5.0.1.jar:libraries/cpw/mods/modlauncher/10.0.8/modlauncher-10.0.8.jar:libraries/net/minecraftforge/unsafe/0.2.0/unsafe-0.2.0.jar:libraries/com/electronwill/night-config/core/3.6.4/core-3.6.4.jar:libraries/com/electronwill/night-config/toml/3.6.4/toml-3.6.4.jar:libraries/org/apache/maven/maven-artifact/3.8.5/maven-artifact-3.8.5.jar:libraries/net/jodah/typetools/0.8.3/typetools-0.8.3.jar:libraries/net/minecrell/terminalconsoleappender/1.2.0/terminalconsoleappender-1.2.0.jar:libraries/org/jline/jline-reader/3.12.1/jline-reader-3.12.1.jar:libraries/org/jline/jline-terminal/3.12.1/jline-terminal-3.12.1.jar:libraries/org/spongepowered/mixin/0.8.5/mixin-0.8.5.jar:libraries/org/openjdk/nashorn/nashorn-core/15.3/nashorn-core-15.3.jar:libraries/net/minecraftforge/JarJarSelector/0.3.16/JarJarSelector-0.3.16.jar:libraries/net/minecraftforge/JarJarMetadata/0.3.16/JarJarMetadata-0.3.16.jar:libraries/net/minecraftforge/fmlloader/1.19.2-43.3.0/fmlloader-1.19.2-43.3.0.jar:libraries/net/minecraft/server/1.19.2-20220805.130853/server-1.19.2-20220805.130853-extra.jar:libraries/com/github/oshi/oshi-core/5.8.5/oshi-core-5.8.5.jar:libraries/com/google/code/gson/gson/2.8.9/gson-2.8.9.jar:libraries/com/google/guava/failureaccess/1.0.1/failureaccess-1.0.1.jar:libraries/com/google/guava/guava/31.0.1-jre/guava-31.0.1-jre.jar:libraries/com/mojang/authlib/3.11.49/authlib-3.11.49.jar:libraries/com/mojang/brigadier/1.0.18/brigadier-1.0.18.jar:libraries/com/mojang/datafixerupper/5.0.28/datafixerupper-5.0.28.jar:libraries/com/mojang/javabridge/1.2.24/javabridge-1.2.24.jar:libraries/com/mojang/logging/1.0.0/logging-1.0.0.jar:libraries/commons-io/commons-io/2.11.0/commons-io-2.11.0.jar:libraries/io/netty/netty-buffer/4.1.77.Final/netty-buffer-4.1.77.Final.jar:libraries/io/netty/netty-codec/4.1.77.Final/netty-codec-4.1.77.Final.jar:libraries/io/netty/netty-common/4.1.77.Final/netty-common-4.1.77.Final.jar:libraries/io/netty/netty-handler/4.1.77.Final/netty-handler-4.1.77.Final.jar:libraries/io/netty/netty-resolver/4.1.77.Final/netty-resolver-4.1.77.Final.jar:libraries/io/netty/netty-transport/4.1.77.Final/netty-transport-4.1.77.Final.jar:libraries/io/netty/netty-transport-classes-epoll/4.1.77.Final/netty-transport-classes-epoll-4.1.77.Final.jar:libraries/io/netty/netty-transport-native-epoll/4.1.77.Final/netty-transport-native-epoll-4.1.77.Final-linux-x86_64.jar:libraries/io/netty/netty-transport-native-epoll/4.1.77.Final/netty-transport-native-epoll-4.1.77.Final-linux-aarch_64.jar:libraries/io/netty/netty-transport-native-unix-common/4.1.77.Final/netty-transport-native-unix-common-4.1.77.Final.jar:libraries/it/unimi/dsi/fastutil/8.5.6/fastutil-8.5.6.jar:libraries/net/java/dev/jna/jna/5.10.0/jna-5.10.0.jar:libraries/net/java/dev/jna/jna-platform/5.10.0/jna-platform-5.10.0.jar:libraries/net/sf/jopt-simple/jopt-simple/5.0.4/jopt-simple-5.0.4.jar:libraries/org/apache/commons/commons-lang3/3.12.0/commons-lang3-3.12.0.jar:libraries/org/apache/logging/log4j/log4j-api/2.17.0/log4j-api-2.17.0.jar:libraries/org/apache/logging/log4j/log4j-core/2.17.0/log4j-core-2.17.0.jar:libraries/org/apache/logging/log4j/log4j-slf4j18-impl/2.17.0/log4j-slf4j18-impl-2.17.0.jar:libraries/org/slf4j/slf4j-api/1.8.0-beta4/slf4j-api-1.8.0-beta4.jar cpw.mods.bootstraplauncher.BootstrapLauncher --launchTarget forgeserver --fml.forgeVersion 43.3.0 --fml.mcVersion 1.19.2 --fml.forgeGroup net.minecraftforge --fml.mcpVersion 20220805.130853 [00:02:42] [main/INFO] [cp.mo.mo.Launcher/MODLAUNCHER]: ModLauncher running: args [--launchTarget, forgeserver, --fml.forgeVersion, 43.3.0, --fml.mcVersion, 1.19.2, --fml.forgeGroup, net.minecraftforge, --fml.mcpVersion, 20220805.130853] [00:02:42] [main/INFO] [cp.mo.mo.Launcher/MODLAUNCHER]: ModLauncher 10.0.8+10.0.8+main.0ef7e830 starting: java version 17.0.10 by Eclipse Adoptium; OS Linux arch amd64 version 6.1.0-12-amd64 [00:02:43] [main/INFO] [mixin/]: SpongePowered MIXIN Subsystem Version=0.8.5 Source=union:/home/container/libraries/org/spongepowered/mixin/0.8.5/mixin-0.8.5.jar%2363!/ Service=ModLauncher Env=SERVER [00:02:43] [main/WARN] [ne.mi.fm.lo.mo.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/fmlcore/1.19.2-43.3.0/fmlcore-1.19.2-43.3.0.jar is missing mods.toml file [00:02:43] [main/WARN] [ne.mi.fm.lo.mo.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/javafmllanguage/1.19.2-43.3.0/javafmllanguage-1.19.2-43.3.0.jar is missing mods.toml file [00:02:43] [main/WARN] [ne.mi.fm.lo.mo.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/lowcodelanguage/1.19.2-43.3.0/lowcodelanguage-1.19.2-43.3.0.jar is missing mods.toml file [00:02:43] [main/WARN] [ne.mi.fm.lo.mo.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/mclanguage/1.19.2-43.3.0/mclanguage-1.19.2-43.3.0.jar is missing mods.toml file [00:02:44] [main/WARN] [ne.mi.ja.se.JarSelector/]: Attempted to select two dependency jars from JarJar which have the same identification: Mod File: and Mod File: . Using Mod File: [00:02:44] [main/WARN] [ne.mi.ja.se.JarSelector/]: Attempted to select a dependency jar for JarJar which was passed in as source: resourcefullib. Using Mod File: /home/container/mods/resourcefullib-forge-1.19.2-1.1.24.jar [00:02:44] [main/INFO] [ne.mi.fm.lo.mo.JarInJarDependencyLocator/]: Found 13 dependencies adding them to mods collection Latest log [29Mar2024 00:02:42.803] [main/INFO] [cpw.mods.modlauncher.Launcher/MODLAUNCHER]: ModLauncher running: args [--launchTarget, forgeserver, --fml.forgeVersion, 43.3.0, --fml.mcVersion, 1.19.2, --fml.forgeGroup, net.minecraftforge, --fml.mcpVersion, 20220805.130853] [29Mar2024 00:02:42.805] [main/INFO] [cpw.mods.modlauncher.Launcher/MODLAUNCHER]: ModLauncher 10.0.8+10.0.8+main.0ef7e830 starting: java version 17.0.10 by Eclipse Adoptium; OS Linux arch amd64 version 6.1.0-12-amd64 [29Mar2024 00:02:43.548] [main/INFO] [mixin/]: SpongePowered MIXIN Subsystem Version=0.8.5 Source=union:/home/container/libraries/org/spongepowered/mixin/0.8.5/mixin-0.8.5.jar%2363!/ Service=ModLauncher Env=SERVER [29Mar2024 00:02:43.876] [main/WARN] [net.minecraftforge.fml.loading.moddiscovery.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/fmlcore/1.19.2-43.3.0/fmlcore-1.19.2-43.3.0.jar is missing mods.toml file [29Mar2024 00:02:43.877] [main/WARN] [net.minecraftforge.fml.loading.moddiscovery.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/javafmllanguage/1.19.2-43.3.0/javafmllanguage-1.19.2-43.3.0.jar is missing mods.toml file [29Mar2024 00:02:43.877] [main/WARN] [net.minecraftforge.fml.loading.moddiscovery.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/lowcodelanguage/1.19.2-43.3.0/lowcodelanguage-1.19.2-43.3.0.jar is missing mods.toml file [29Mar2024 00:02:43.878] [main/WARN] [net.minecraftforge.fml.loading.moddiscovery.ModFileParser/LOADING]: Mod file /home/container/libraries/net/minecraftforge/mclanguage/1.19.2-43.3.0/mclanguage-1.19.2-43.3.0.jar is missing mods.toml file [29Mar2024 00:02:44.033] [main/WARN] [net.minecraftforge.jarjar.selection.JarSelector/]: Attempted to select two dependency jars from JarJar which have the same identification: Mod File: and Mod File: . Using Mod File: [29Mar2024 00:02:44.034] [main/WARN] [net.minecraftforge.jarjar.selection.JarSelector/]: Attempted to select a dependency jar for JarJar which was passed in as source: resourcefullib. Using Mod File: /home/container/mods/resourcefullib-forge-1.19.2-1.1.24.jar [29Mar2024 00:02:44.034] [main/INFO] [net.minecraftforge.fml.loading.moddiscovery.JarInJarDependencyLocator/]: Found 13 dependencies adding them to mods collection
    • I am unable to do that. Brigadier is a mojang library that parses commands.
    • Hi, i appreciate the answer. I would love to do that, but we have active players with all their belongings in SSN. Also this mod is really handy and they would be mad if we removed it. Are you really certain that SSN is causing this? It would require lots of work to test it and SSN was not really an issue before we removed Fast Suite. Can it be related somehow? I will provide you with log before removing FS. PasteBin: https://pastebin.com/Y5EpLpNe (crash before removing Fast Suite, which I suspected to be a problem from some crash before)
    • Backup the world and make a test without storagenetwork
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.