Jump to content

[1.12] Can't figure out why my block doesn't render properly


weznon

Recommended Posts

The model in question: https://gist.github.com/Weznon/72a299489ba47f58689538b21138f4ae

 

The blockstate in question: https://gist.github.com/Weznon/95f991cc7baee9db98e08968b79d72e6

 

The end goal of the block is to have it's orientation change when placed to face the player, and then depending on 3 Boolean values, recolor 3 rectangles on the front block face using overlays.

So the front texture is

 koa3CZW.png

and when a certain boolean is true, the texture on the face of the block will turn to rhR7HRf.png

by setting an overlay texture to be a transparent texture with the purple rectangle.

 

When I load the world, I get

 wt2sd4t.png

 

 

I believe that the error is in my block model (might be wrong though), since when I changed the inventory variant to use a different block model the block rendered properly in my inventory.

 

I based the JSON off of the following post:

 

 

I have checked to make sure all the file names/locations are correct.

 

Thank you for the help, I've been stuck on this for a while and I can't figure out what's wrong.

Link to comment
Share on other sites

Post the log. There will always be an error in the log about failed models/textures/blockstates.

 

In addition, I notice that your blockstate has 48 possible states, of which only 16 can be encoded in metadata (i.e. without using a TileEntity). The rest need to be encoded in either world information ("there is a solid block under me") or in a TileEntity.

Apparently I'm a complete and utter jerk and come to this forum just like to make fun of people, be confrontational, and make your personal life miserable.  If you think this is the case, JUST REPORT ME.  Otherwise you're just going to get reported when you reply to my posts and point it out, because odds are, I was trying to be nice.

 

Exception: If you do not understand Java, I WILL NOT HELP YOU and your thread will get locked.

 

DO NOT PM ME WITH PROBLEMS. No help will be given.

Link to comment
Share on other sites

https://pastebin.com/wkeVU3Mp

 

Here is the log when i start up the client and load a world.

 

The booleans are encoded in a tile entity, and are recovered using an overrided getActualState. Only "facing" is stored in block metadata, the rest is in a tile entity. 

 

From looking through the log I don't see any errors, though I only gave it a cursory glance.

 

Edited by weznon
Link to comment
Share on other sites

Show how you register your models.

Don't PM me with questions. They will be ignored! Make a thread on the appropriate board for support.

 

1.12 -> 1.13 primer by williewillus.

 

1.7.10 and older versions of Minecraft are no longer supported due to it's age! Update to the latest version for support.

 

http://www.howoldisminecraft1710.today/

Link to comment
Share on other sites

package com.weznon.blink.block;

import net.minecraft.block.Block;
import net.minecraft.block.material.Material;
import net.minecraft.creativetab.CreativeTabs;
import net.minecraft.item.Item;
import net.minecraftforge.fml.common.registry.GameRegistry;
import net.minecraftforge.registries.IForgeRegistry;

public class ModBlocks {

    private static BlockHorde blockHorde = new BlockHorde().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockCounter blockCounter = new BlockCounter().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockTexture blockTexture = new BlockTexture().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockTextureFace blockTextureFace = new BlockTextureFace().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockBinaryCounter blockBinaryCounter = new BlockBinaryCounter().setCreativeTab(CreativeTabs.MATERIALS);
    private static BlockTextureBool blockTextureBool = new BlockTextureBool().setCreativeTab(CreativeTabs.MATERIALS);

    public static void register(IForgeRegistry<Block> registry) {
        registry.registerAll(
                blockHorde,
                blockCounter,
                blockTexture,
                blockTextureFace,
                blockBinaryCounter,
                blockTextureBool
        );

        GameRegistry.registerTileEntity(blockCounter.getTileEntityClass(), blockCounter.getRegistryName().toString());
        GameRegistry.registerTileEntity(blockBinaryCounter.getTileEntityClass(), blockBinaryCounter.getRegistryName().toString());

    }

    public static void registerItemBlocks(IForgeRegistry<Item> registry) {
        registry.registerAll(
                blockHorde.createItemBlock(),
                blockCounter.createItemBlock(),
                blockTexture.createItemBlock(),
                blockTextureFace.createItemBlock(),
                blockBinaryCounter.createItemBlock(),
                blockTextureBool.createItemBlock()
        );
    }

    public static void registerModels() {
        blockHorde.registerItemModel(Item.getItemFromBlock(blockHorde));
        blockCounter.registerItemModel(Item.getItemFromBlock(blockCounter));
        blockTexture.registerItemModel(Item.getItemFromBlock(blockTexture));
        blockTextureFace.registerItemModel(Item.getItemFromBlock(blockTextureFace));
        blockBinaryCounter.registerItemModel(Item.getItemFromBlock(blockBinaryCounter));
        blockTextureBool.registerItemModel(Item.getItemFromBlock(blockTextureBool));
    }

}

 

Above is where I do all the registration stuff for blocks

 

 

@Mod.EventBusSubscriber
    public static class RegistrationHandler {

        @SubscribeEvent
        public static void registerItems(RegistryEvent.Register<Item> event) {
            ModItems.register(event.getRegistry());
            ModBlocks.registerItemBlocks(event.getRegistry());

        }

        @SubscribeEvent
        public static void registerModels(ModelRegistryEvent event) {
            ModItems.registerModels();
            ModBlocks.registerModels();
        }

        @SubscribeEvent
        public static void registerBlocks(RegistryEvent.Register<Block> event) {
            ModBlocks.register(event.getRegistry());
        }
    }

Above is RegistrationHandler from my main mod class (Blink.java)

 

I have been following Shadowfacts modding tutorial, thats where i got this method of registering models

 

Source is at https://gitlab.com/weznon/minecraftBlink, just in case I forgot to paste anything.

 

All of the other blocks render properly

Edited by weznon
Link to comment
Share on other sites

I did some testing on my own and I I found the problem

 

In my block model JSON, i only had partially filled elements, ie 

{   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay", "tintindex": 0, "cullface": "north" },
      }
    }

In this JSON i dont define things to put on the other faces of the block

 

This caused the texture to go bad, you need to have all of the faces filled in. I made a blank texture and used that for all of the sides I do not want an overlay on.


 

{ "parent": "block/block",
  "elements": [
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#base",   "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#side",   "cullface": "east" }
      }
    },
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay0", "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "east" }
      }
    },
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay0", "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "east" }
      }
    },
    {   "from": [ 0, 0, 0 ],
      "to": [ 16, 16, 16 ],
      "faces": {
        "down":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "down" },
        "up":    { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "up" },
        "north": { "uv": [ 0, 0, 16, 16 ], "texture": "#overlay0", "cullface": "north" },
        "south": { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "south" },
        "west":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "west" },
        "east":  { "uv": [ 0, 0, 16, 16 ], "texture": "#blank", "cullface": "east" }
      }
    }
  ]
}

 

is my blockmodel now and it works, some texture references are incorrect but the  gist is there.

 

thank you for the help

 

 

Edited by weznon
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • Akun Pro Kamboja adalah pilihan terbaik bagi Anda yang mencari pengalaman bermain slot Maxwin dengan transaksi mudah menggunakan Bank Lampung. Berikut adalah beberapa alasan mengapa Anda harus memilih Akun Pro Kamboja: Slot Maxwin Terbaik Kami menyajikan koleksi slot Maxwin terbaik yang menawarkan kesenangan bermain dan peluang kemenangan besar. Dengan fitur-fitur unggulan dan tema-tema menarik, setiap putaran permainan akan memberikan Anda pengalaman yang tak terlupakan. Transaksi Mudah dengan Bank Lampung Kami menyediakan layanan transaksi mudah melalui Bank Lampung untuk kenyamanan dan keamanan Anda. Dengan proses yang cepat dan efisien, Anda dapat melakukan deposit dan penarikan dana dengan lancar dan tanpa hambatan. Anti Rungkat Akun Pro Kamboja memberikan jaminan "anti rungkat" kepada para pemainnya. Dengan fitur ini, Anda dapat merasakan sensasi bermain dengan percaya diri, karena kami memastikan pengalaman bermain yang adil dan menyenangkan bagi semua pemain.  
    • BINGO188: Destinasi Terbaik untuk Pengalaman Slot yang Terjamin Selamat datang di BINGO188, tempat terbaik bagi para pecinta slot yang mencari pengalaman bermain yang terjamin dan penuh kemenangan. Di sini, kami menawarkan fitur unggulan yang dirancang untuk memastikan kepuasan dan keamanan Anda. Situs Slot Garansi Kekalahan 100 Kami memahami bahwa kadang-kadang kekalahan adalah bagian dari permainan. Namun, di BINGO188, kami memberikan jaminan keamanan dengan fitur garansi kekalahan 100. Jika Anda mengalami kekalahan, kami akan mengembalikan saldo Anda secara penuh. Kemenangan atau uang kembali, kami memastikan Anda tetap merasa aman dan nyaman. Bebas IP Tanpa TO Nikmati kebebasan bermain tanpa batasan IP dan tanpa harus khawatir tentang TO (Turn Over) di BINGO188. Fokuslah pada permainan Anda dan rasakan sensasi kemenangan tanpa hambatan. Server Thailand Paling Gacor Hari Ini Bergabunglah dengan server terbaik di Thailand hanya di BINGO188! Dengan tingkat kemenangan yang tinggi dan pengalaman bermain yang lancar, server kami dijamin akan memberikan Anda pengalaman slot yang tak tertandingi. Kesimpulan BINGO188 adalah pilihan terbaik bagi Anda yang menginginkan pengalaman bermain slot yang terjamin dan penuh kemenangan. Dengan fitur situs slot garansi kekalahan 100, bebas IP tanpa TO, dan server Thailand paling gacor hari ini, kami siap memberikan Anda pengalaman bermain yang aman, nyaman, dan menguntungkan. Bergabunglah sekarang dan mulailah petualangan slot Anda di BINGO188!
    • Mengapa Memilih AlibabaSlot? AlibabaSlot adalah pilihan terbaik bagi Anda yang mencari slot gacor dari Pgsoft dengan transaksi mudah menggunakan Bank Panin. Berikut adalah beberapa alasan mengapa Anda harus memilih AlibabaSlot: Slot Gacor dari Pgsoft Kami menyajikan koleksi slot gacor terbaik dari Pgsoft. Dengan fitur-fitur unggulan dan peluang kemenangan yang tinggi, setiap putaran permainan akan memberikan Anda kesenangan dan keuntungan yang maksimal. Transaksi Mudah dengan Bank Panin Kami menyediakan layanan transaksi mudah melalui Bank Panin untuk kenyamanan dan keamanan Anda. Dengan proses yang cepat dan efisien, Anda dapat melakukan deposit dan penarikan dana dengan lancar dan tanpa masalah.  
    • Delete the jei-server.toml file in your config folder and test it again
    • java.util.ConcurrentModificationException at java.base/java.util.HashMap.computeIfAbsent(Unknown Source) at Genesis//com.moonsworth.lunar. ... Looks like an issue with the Launcher - Make a test with another Launcher like MultiMC, AT Launcher or Technic Launcher or try the original one
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.