Jump to content

Getting a Mod List


jdawg3636

Recommended Posts

Hello there. I'm currently trying to make an anticheat mod that would send a list of client-side mods to the server. Obviously this could be beaten quite easily by someone with experience, but it should at least help to deter those barely capable of adding Xray.jar to their mods folder. As I am relatively new to forge, I am unsure of the best method of obtaining a list of mods currently installed on the client, although I assume that this should be done during Postinitialization. Any ideas?

Website: jdawg3636.com
Discord: discord.gg/EKeM7Jz

Link to comment
Share on other sites

7 minutes ago, Kokkie said:

1.7.10 is no longer supported.

I am aware of this, a previous thread of mine was locked for that reason. However, this mod would support all versions from 1.7 and above, many of which are supported, and I'm pretty sure that the question that I have pertains to the later versions as well. I titled the previous thread that way because that's just the version that I happened to pick to start with.

Website: jdawg3636.com
Discord: discord.gg/EKeM7Jz

Link to comment
Share on other sites

  • Guest locked and unlocked this topic
6 minutes ago, Kokkie said:

Still you're using it for an unsupported version. If you update you're free to ask.

Then for the sake of this thread, assume that I'm using 1.8.

4 minutes ago, diesieben07 said:

Stop using 1.7.10, seriously.

And there is no way to block client mods, the client always lies.

Most modpacks are still for 1.7, which I see as one of the main uses for this. I'll update when the community updates. As for the client being able to lie, of course that's an issue. This is simply designed to put up a roadblock for those that don't know how to mod.

Website: jdawg3636.com
Discord: discord.gg/EKeM7Jz

Link to comment
Share on other sites

  • Guest locked this topic
Guest
This topic is now closed to further replies.

Announcements



  • Recently Browsing

    • No registered users viewing this page.
  • Posts

    • They were already updated, and just to double check I even did a cleanup and fresh update from that same page. I'm quite sure drivers are not the problem here. 
    • i tried downloading the drivers but it says no AMD graphics hardware has been detected    
    • Update your AMD/ATI drivers - get the drivers from their website - do not update via system  
    • As the title says i keep on crashing on forge 1.20.1 even without any mods downloaded, i have the latest drivers (nvidia) and vanilla minecraft works perfectly fine for me logs: https://pastebin.com/5UR01yG9
    • Hello everyone, I'm making this post to seek help for my modded block, It's a special block called FrozenBlock supposed to take the place of an old block, then after a set amount of ticks, it's supposed to revert its Block State, Entity, data... to the old block like this :  The problem I have is that the system breaks when handling multi blocks (I tried some fix but none of them worked) :  The bug I have identified is that the function "setOldBlockFields" in the item's "setFrozenBlock" function gets called once for the 1st block of multiblock getting frozen (as it should), but gets called a second time BEFORE creating the first FrozenBlock with the data of the 1st block, hence giving the same data to the two FrozenBlock :   Old Block Fields set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=head] BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@73681674 BlockEntityData : id:"minecraft:bed",x:3,y:-60,z:-6} Old Block Fields set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=foot] BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@6d1aa3da BlockEntityData : {id:"minecraft:bed",x:2,y:-60,z:-6} Frozen Block Entity set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=foot] BlockPos{x=3, y=-60, z=-6} BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@6d1aa3da BlockEntityData : {id:"minecraft:bed",x:2,y:-60,z:-6} Frozen Block Entity set BlockState : Block{minecraft:black_bed}[facing=east,occupied=false,part=foot] BlockPos{x=2, y=-60, z=-6} BlockEntity : net.minecraft.world.level.block.entity.BedBlockEntity@6d1aa3da BlockEntityData : {id:"minecraft:bed",x:2,y:-60,z:-6} here is the code inside my custom "freeze" item :    @Override     public @NotNull InteractionResult useOn(@NotNull UseOnContext pContext) {         if (!pContext.getLevel().isClientSide() && pContext.getHand() == InteractionHand.MAIN_HAND) {             BlockPos blockPos = pContext.getClickedPos();             BlockPos secondBlockPos = getMultiblockPos(blockPos, pContext.getLevel().getBlockState(blockPos));             if (secondBlockPos != null) {                 createFrozenBlock(pContext, secondBlockPos);             }             createFrozenBlock(pContext, blockPos);             return InteractionResult.SUCCESS;         }         return super.useOn(pContext);     }     public static void createFrozenBlock(UseOnContext pContext, BlockPos blockPos) {         BlockState oldState = pContext.getLevel().getBlockState(blockPos);         BlockEntity oldBlockEntity = oldState.hasBlockEntity() ? pContext.getLevel().getBlockEntity(blockPos) : null;         CompoundTag oldBlockEntityData = oldState.hasBlockEntity() ? oldBlockEntity.serializeNBT() : null;         if (oldBlockEntity != null) {             pContext.getLevel().removeBlockEntity(blockPos);         }         BlockState FrozenBlock = setFrozenBlock(oldState, oldBlockEntity, oldBlockEntityData);         pContext.getLevel().setBlockAndUpdate(blockPos, FrozenBlock);     }     public static BlockState setFrozenBlock(BlockState blockState, @Nullable BlockEntity blockEntity, @Nullable CompoundTag blockEntityData) {         BlockState FrozenBlock = BlockRegister.FROZEN_BLOCK.get().defaultBlockState();         ((FrozenBlock) FrozenBlock.getBlock()).setOldBlockFields(blockState, blockEntity, blockEntityData);         return FrozenBlock;     }  
  • Topics

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.